BenzUnited Parts
aFe Pro DRY S 30-10417DM High-Flow Air Filters – Mercedes M276 3.0L V6 | C43 AMG, E43, GLC43, GLE43, C450, C400 (Set of 2)
aFe Pro DRY S 30-10417DM High-Flow Air Filters – Mercedes M276 3.0L V6 | C43 AMG, E43, GLC43, GLE43, C450, C400 (Set of 2)
Couldn't load pickup availability
The aFe Pro DRY S 30-10417DM is a pair of high-flow, washable panel air filters for the Mercedes M276 DE30 LA 3.0L V6 BiTurbo — C43 AMG, E43, GLC43, GLE43, C450 and every other model running this engine. This listing includes both filters, because the M276 uses two filter housings and a complete change needs both. Synthetic, oil-free media, made in the United States, drops straight into the factory housings in about ten minutes with no tuning and no modification.
What You Get
| Part Number | aFe 30-10417DM |
| Quantity Included | 2 filters (left and right) — one complete vehicle set |
| Filter Media | Synthetic, oil-free |
| Tune Required | No |
| Install | Drop-in, 5–10 minutes, Torx driver required |
| Reusable | Yes — washable, no oil required |
| Made In | United States |
| Ships | Within 2 business days |
Cold Air Intakes Aren't Pulling Cold Air
Ironically, "cold air intakes" use open cone filters, exposing them to hot air from the engine bay. When IATs rise, the ECU then pulls timing, reducing power when you are driving hard or doing repeated pulls.
The factory Mercedes airbox already channels cold air from the outside. Sealed, ducted to the grille. The paper panel inside is the only real restriction, and that is what these performance air filters replace.
Fitment — M276 DE30 LA 3.0L V6 BiTurbo
| Model | Chassis | Years |
|---|---|---|
| C400 4MATIC | W205 | 2015–2021 |
| C450 AMG 4MATIC | W205 | 2015–2017 |
| C43 AMG — Sedan / Wagon | W205 / S205 | 2016–2021 |
| C43 AMG — Coupé / Cabriolet | C205 / A205 | 2017–2023 |
| CLS400 / CLS400 4MATIC | C218 / W218 | 2014–2017 |
| E400 / E400 4MATIC | W212 | 2013–2014 |
| E400 Coupé / Cabriolet | C207 / A207 | 2013–2017 |
| E400 4MATIC | W213 | 2016–2018 |
| E43 AMG 4MATIC | W213 | 2016–2018 |
| E450 4MATIC | W213 | 2019–2020 |
| GLC43 AMG — SUV / Coupé | X253 / C253 | 2015–2022 |
| GL400 / GLS450 4MATIC | X166 | 2014–2019 |
| ML400 / GLE400 4MATIC | W166 | 2015–2017 |
| GLE43 AMG 4MATIC | W166 / C292 | 2015–2019 |
| GLE450 AMG 4MATIC | W166 / C292 | 2016–2017 |
| GLE550e 4MATIC | W166 | 2016–2018 |
| S400 / S400 4MATIC | W222 | 2014–2020 |
| S450 4MATIC | W222 | 2018–2020 |
| S550e (S500 Plug-In Hybrid) | W222 | 2014–2017 |
| S560e | W222 | 2018–2020 |
| SL400 | R231 | 2014–2020 |
| SL450 | R231 | 2017–2020 |
| SLC43 AMG | R172 | 2016–2020 |
Install & Maintenance
Lift the engine cover off and flip it over. Undo the Torx screws, pull off the bottom of each housing, swap the filters, and put it all back together. No cutting, no wiring, no tuning.
No oil, ever. Wash with filter cleaner and water, rinsing from the clean side outward, air dry at room temperature, and reinstall. Nothing to re-oil means nothing to over-oil, so the MAF question never comes up.
Warranty, Shipping & Returns
- Warranty: aFe Power Limited Lifetime Warranty against manufacturer defects.
- Shipping: Ships within 2 business days.
- Returns: 30-day returns on unused items in original packaging.
Questions
How many filters does my car need?
Two. The M276 uses two filter housings, one per bank. This listing ships both, so you are not hunting for a second panel after the box arrives.
Do I need a tune to run these?
No. These are direct replacements for the factory panels and work on a completely stock car. A tune is where the real power is, but it is not a requirement for fitting these.
Will this contaminate my MAF sensor?
No. Dry media uses no oil at all, so there is nothing to migrate downstream. This is the filter to buy if MAF contamination is the thing keeping you off a washable filter.
Is a cold air intake better than this?
On the M276, no. The factory box is already sealed and ducted to outside air, so the paper panel is the restriction rather than the box. An open cone gains a little peak flow and gives up intake temperature, which is the wrong trade on a turbocharged engine. A full intake kit earns its place once you are chasing airflow beyond what the factory box supports.
How often do they need cleaning?
aFe publishes a cleaning interval of roughly every 20,000 to 30,000 miles, sooner if you have been through extremely dusty or dirty conditions.
Do these fit the factory airbox without modification?
Yes. They are OEM-shape panel filters. Nothing is cut, drilled, relocated or removed, and the factory heat shielding stays exactly as it is.
